Author: VettePro

~ September 2, 2010

England Green in Houston just installed an A&A Corvette Supercharger Kit on John’s2007 C6 Z06. There were no other modifications made to the car. Yes, this car is bone stock otherwise. The end result? 644 RWHP and 560 RWTQ.

EnglandGreen Corp.
3135 Fall Street
Houston,TX 77054
281-464-2800
http://www.englandgreen.com

Author: VettePro

~ August 31, 2010

Vengeance Racing in Cumming, GA, just finished this 2008 Z06 forged engine and supercharger package installation. From the Proline Race Engines forged 427″ LS7 shortblock to the A&A Corvette YSi supercharger kit, this Vette put down 789 RWHP!

Mods:
Proline Race Engines -- Forged 427″ LS7 Shortblock
ARP Main & Head Studs
Comp 26926 Spring Kit
Katech C5R Timing Chain
American Racing 1-7/8″ Stainless Longtubes
A&A Corvette Supercharger System
Vortech YSi-Trim Supercharger
A&A 8-rib Upgrade
12 Pounds of Boost
RPS Street Twin Lite Clutch Kit
Pfadt Racing Coilovers
Pfadt Racing Sway Bars
Pfadt Racing Adjustable Camber Kit
Install / Tuning by Vengeance Racing
789.74 RWHP
712.65 RWTQ

Street Video:

Vengeance Racing
241 Castleberry Industrial Drive, Suite B
Cumming, GA 30040
678-513-7105
http://www.vengeancerd.com

Author: VettePro

~ August 19, 2010

East Texas supercharged Marcus’ 2001 Z06 Corvette. He bolted a “NEWSED” (New and used parts) A&A Corvette supercharger kit which utilizes a Vortech V-3 Si-Trim. This kit also utilized an earlier style air to air intercooler. (Newer systems use the “Ram Air” style) Also installed was a set of long tube headers and a Corsa cat-back system. After cusom tuning was finished, the Z06 put down 595rwhp and 509rwtq. Follow along with the install in the following pictures and video.

East Texas Muscle Cars
5917 McCann Rd
Longview, TX 75605
903-686-0456
www.easttexasmusclecars.com

Author: VettePro

~ August 18, 2010

Even though Andy Wheeler sold this beauty a couple years ago, it is still one of the best looking Vettes we’ve seen. Enjoy the photos!

Modifications:
A&A Corvette Custom Supercharger Kit
Vortech S trim Supercharger
3.6″ 6-Rib Custom Painted Riechard Racing Pulley
AIS Trunk Mounted Alcohol Injection
Turbo Smart Blow off Valve
Modular Concept Carbon Fiber Wheels 19′s and 20′s
American Racing Headers
American racing headers X pipe with cats
B&B Bullet Exhaust
Carbon Fiber MPH intake Manifold
Ported Throttle Body
Drilled and Slotted Brake Rotors
MCM Carbon Fiber Hood with Cleared Center Section
WCMC Carbon Fiber Brake Ducts
Brey Kraus Harness Bar
5 Point belts
VE Custom Carbon Fiber Interior Peices
VE Steering wheel
Redline goods Shift boot, arm rest, and arm rest cover
Tune by Doug at ECS
Loyds Z06 floor mats
Custom Meth tank cover with AIS logo in 1/2 plexi
Textrailia 0Z700 Z grip Clutch
DTE Rear End Brace
Painted lower rear facia

Check out his posters here.

Author: VettePro

~ August 12, 2010

Luigi brought his 2009 Z51 Corvette to Tom at Wong’s Performance in Vancouver, WA, to have an A&A Supercharger kit installed. In addition to the custom supercharger kit, he also had American Racing long tube headers installed. The car was tuned and the power was impressive!  The results on the rollers? 597 RWHP and 544 RWTQ.

A&A Corvette Custom Supercharger Kit
Vortech V-3 Si-Trim Supercharger
American Racing Headers
Custom tune by Tom Wong
597 RWHP
545 RWTQ

Wong’s Performance Engineering
9305 NE Hwy 99
Vancouver, WA 98665
360-695-9433

Author: VettePro

~ August 4, 2010

 Champion Motors, in Ontario, Canada, supercharged Mike’s 2007 Corvette. The addition of the A&A Corvette Supercharger kit increased the horsepower 339 to 569 and the torque increased from 346 lb./ft. to 495 lb./ft. This is a gain of 230 RWHP!

Champion Motors
1861 O’Connor Drive
North York, Ontario M4A 1X1
416-751-8047
http://www.cdnperf.com

Author: VettePro

~ August 3, 2010

Here  is a 2005 C6 Z51 Convertible Black on Black Corvette that AutoXTC in Clearwater, FL, installed an A&A Corvette Supercharger Kit on. The car has many modifications besides the supercharger, including headers, camshaft, valve springs, heavy duty clutch, custom wheels and more. The Vette puts down 620 RWHP and 620 lb./ft. RWTQ! Here is the list of modifications:

A&A Corvette Supercharger Kit
Vortech V-2 S-Trim Supercharger
Melrose Headers
Magnaflow Exhaust
Custom Grind Camshaft (580 intake, 225 duration, 590 exhaust,229 duration, 114 lobe separation)
.650 Lift Dual Springs w/Titanium Retainers
New Valve Seals and Keepers
7.400 Hardened Push rods
New Cryogenic Timing Chain
Reworked Oil Pump For Higher Pressure
New Timing Cover Gasket and Seal
New Harmonic Balancer Bolt
160 Deg Low Thermostat
PCM Performance Tune w/Read Out
New head gaskets
Ported Intake and TB
775hp Monster Clutch Lvl 3.5
Vossen VVS087 Wheels
Pirelli Tires
Black Tail Wing
Hurst Skull Shifter
Black-Out Lights (not fully in tail)
Red Calipers
Black Engine Covers
Powder-coated Black Rear Plate
Chrome Trim – gearshift boot and cup holder
Interior Black Trim / Dash&Doors
Navigation/Touch screen – std. Bose speaker system
iPod connector in cup holder – modified by AutoXTC
Escort 9500ix Radar Detector GPS inviscord/rear-view
620 RWHP
610 RWTQ

AutoXTC
4400 118th Ave. N. #305
Clearwater, FL 33762
727.556.0335
http://www.autoxtc.com

Author: VettePro

~ July 16, 2010

Vengeance Racing in Georgia installed an A&A Corvette Supercharger Kit on Norm’s 2002 Z06 Corvette. On the rollers after the modifications, it put down 599RWHP!

Modifications completed while at Vengeance Racing include:

A&A Corvette Custom Supercharger System
Vortech V-3 Si Supercharger
Siemens Flow Matched / Balanced Fuel Injectors
FAST 92mm Intake Ported by Vengeance
GM LS2 90mm Throttlebody
American Racing Longtube Header Systems with Hi Flow Catted X pipe
Complete / Professional Installation by Vengeance Racing
Custom Tuning VIA EFI live
Pfadt Racing Coilovers
Pfadt Racing Sway Bars
599.10 RWHP
525.00 RWTQ

Vengeance Racing
241 Castleberry Industrial Drive, Suite B
Cumming, GA 30040
678-513-7105
http://www.vengeancerd.com

Author: VettePro

~ July 2, 2010

Reckart Performance Tuning, in Cedar Park, TX, just installed an A&A Corvette Supercharger Kit on this 1999 Corvette. The car went to Brian with Texas Speed 220/220 0.576”0.576” 114 LSA Camshaft, Stage 1 LS6 heads and 7.400” Chromemoly Pushrods, and Kooks 1.75″ Long tube headers with cats. In this form the car made 381 RWHP and 360 RWTQ. They installed the V-2 Si-Trim supercharger and then did a custom tune. New numbers are 573 RWHP and 515 RWTQ!

718B North Park Circle
Cedar Park, TX 78613
(512)653-8887
http://www.reckartperformancetuning.com

Author: VettePro

~ June 29, 2010

A&A Vortech strikes again!

Aleck brought his near stock (just a Vararam & dyno tune) 2004 Z06 to EnglandGreen, in Houston, for their A&A Corvette Vortech Si-Trim supercharger install special. They also installed the A&A MAF girdle.

His baby left with 533rwhp and 476rwtq! A gain of 159 horsepower and 111 ft. lb. of torque!

EnglandGreen Corp.
3135 Fall Street
Houston,TX 77054
281-464-2800
http://www.englandgreen.com

« Newer Entries