England Green in Houston just installed an A&A Corvette Supercharger Kit on John’s2007 C6 Z06. There were no other modifications made to the car. Yes, this car is bone stock otherwise. The end result? 644 RWHP and 560 RWTQ.

EnglandGreen Corp.
3135 Fall Street
Houston,TX 77054
281-464-2800
http://www.englandgreen.com

Share on Facebook

East Texas supercharged Marcus’ 2001 Z06 Corvette. He bolted a “NEWSED” (New and used parts) A&A Corvette supercharger kit which utilizes a Vortech V-3 Si-Trim. This kit also utilized an earlier style air to air intercooler. (Newer systems use the “Ram Air” style) Also installed was a set of long tube headers and a Corsa cat-back system. After cusom tuning was finished, the Z06 put down 595rwhp and 509rwtq. Follow along with the install in the following pictures and video.

East Texas Muscle Cars
5917 McCann Rd
Longview, TX 75605
903-686-0456
www.easttexasmusclecars.com

Share on Facebook

Even though Andy Wheeler sold this beauty a couple years ago, it is still one of the best looking Vettes we’ve seen. Enjoy the photos!

Modifications:
A&A Corvette Custom Supercharger Kit
Vortech S trim Supercharger
3.6″ 6-Rib Custom Painted Riechard Racing Pulley
AIS Trunk Mounted Alcohol Injection
Turbo Smart Blow off Valve
Modular Concept Carbon Fiber Wheels 19′s and 20′s
American Racing Headers
American racing headers X pipe with cats
B&B Bullet Exhaust
Carbon Fiber MPH intake Manifold
Ported Throttle Body
Drilled and Slotted Brake Rotors
MCM Carbon Fiber Hood with Cleared Center Section
WCMC Carbon Fiber Brake Ducts
Brey Kraus Harness Bar
5 Point belts
VE Custom Carbon Fiber Interior Peices
VE Steering wheel
Redline goods Shift boot, arm rest, and arm rest cover
Tune by Doug at ECS
Loyds Z06 floor mats
Custom Meth tank cover with AIS logo in 1/2 plexi
Textrailia 0Z700 Z grip Clutch
DTE Rear End Brace
Painted lower rear facia

Check out his posters here.

Share on Facebook

Luigi brought his 2009 Z51 Corvette to Tom at Wong’s Performance in Vancouver, WA, to have an A&A Supercharger kit installed. In addition to the custom supercharger kit, he also had American Racing long tube headers installed. The car was tuned and the power was impressive!  The results on the rollers? 597 RWHP and 544 RWTQ.

A&A Corvette Custom Supercharger Kit
Vortech V-3 Si-Trim Supercharger
American Racing Headers
Custom tune by Tom Wong
597 RWHP
545 RWTQ

Wong’s Performance Engineering
9305 NE Hwy 99
Vancouver, WA 98665
360-695-9433

Share on Facebook

We will install one of our latest supercharger systems and one of our small blower cams with all the necessary hardware for $7500. This will include the complete supercharger system with camshaft, springs and a heavy duty adjustable timing set, installation, dyno tuning, fluids etc.

The blower cam will REALLY wake the car up.

If you just want the system installed, without the cam, it will be $6599. We’re just going to do a few at this price. If you think about it, the cam deal is a better way to go. Why? You’re getting the cam installed for just about $0.00!

This deal applies to our Si-Trim (V-2 or V-3) system on any C5 or C6. The C6 Z06 and Z51 LS3 6 speeds will also include a new DeWitt’s radiator. ($650)

If you are interested in a bigger build, give us a call, we’ll work an equally great deal on a complete forged motor and supercharger setup.

A&A Corvette C5 Supercharger Kit

A&A Corvette C6 Supercharger Kit

Share on Facebook

Reckart Performance Tuning, in Cedar Park, TX, just installed an A&A Corvette Supercharger Kit on this 1999 Corvette. The car went to Brian with Texas Speed 220/220 0.576”0.576” 114 LSA Camshaft, Stage 1 LS6 heads and 7.400” Chromemoly Pushrods, and Kooks 1.75″ Long tube headers with cats. In this form the car made 381 RWHP and 360 RWTQ. They installed the V-2 Si-Trim supercharger and then did a custom tune. New numbers are 573 RWHP and 515 RWTQ!

718B North Park Circle
Cedar Park, TX 78613
(512)653-8887
http://www.reckartperformancetuning.com

Share on Facebook

Another question we get asked often is: “How will higher elevations, such as Colorado or Utah, affect boost pressure?”

Here is a quote from our friends at Vortech Engineering and Paxton Automotive.

“As a result of the change in atmospheric pressure with an increase in altitude, a drop in boost pressure is common when operating in such cities as Denver, Colorado. You’ll experience a 1 1/2 to 2 psig drop in pressure at an elevation of 5000 feet above sea level.”

Most of the systems we ship to the higher elevations have a one-size drop in pulley size. (We discuss the options with the customer before varying from the standard diameter.) Of course, these owners have to remember if they take a road trip that involves elevations close to sea level, their boost pressure will increase!

Share on Facebook

The Vette Doctors in Amityville, NY, just finished up Vito’s 2008 Z06. They installed an A&A Corvette Supercharger kit along with American Racing long tube headers and an Alky injection kit. After the Docs installed the supercharger kit and tuned the car, it made 677 RWHP and 575 RWTQ!

The Vette Doctors, Inc.
26 Elm Place
Amityville, NY 11701
631-841-0779
http://www.thevettedoctors.com

Share on Facebook

James and the crew at County Corvette installed and tuned an A&A Corvette Supercharger Kit on this 2007 Corvette. Along with the Supercharger, they added headers.  Here are the specs:

• A&A Corvette Supercharger Kit
• Kooks 1 3/4″ Headers
• Kooks 3″ x 2.5″ X-Pipe

County Corvette
315 Westtown Road
West Chester, PA 19382
610-696-7888
http://www.countycorvette.com

Share on Facebook

EnglandGreen Corp. in Houston, TX, recently installed an A&A Corvette Supercharger Kit on Kevin’s bone stock 2002 Z06. No other modifications were done to the Vette. After tuning the newly boosted Z, the horsepower gain over stock was 192! Torque increase of 141 ft/lbs. Final results: 553rwhp 495rwtq.

EnglandGreen Corp.
3135 Fall Street
Houston,TX 77054
281-464-2800
http://www.englandgreen.com

Share on Facebook