East Texas supercharged Marcus’ 2001 Z06 Corvette. He bolted a “NEWSED” (New and used parts) A&A Corvette supercharger kit which utilizes a Vortech V-3 Si-Trim. This kit also utilized an earlier style air to air intercooler. (Newer systems use the “Ram Air” style) Also installed was a set of long tube headers and a Corsa cat-back system. After cusom tuning was finished, the Z06 put down 595rwhp and 509rwtq. Follow along with the install in the following pictures and video.

East Texas Muscle Cars
5917 McCann Rd
Longview, TX 75605
903-686-0456
www.easttexasmusclecars.com

Share on Facebook

Even though Andy Wheeler sold this beauty a couple years ago, it is still one of the best looking Vettes we’ve seen. Enjoy the photos!

Modifications:
A&A Corvette Custom Supercharger Kit
Vortech S trim Supercharger
3.6″ 6-Rib Custom Painted Riechard Racing Pulley
AIS Trunk Mounted Alcohol Injection
Turbo Smart Blow off Valve
Modular Concept Carbon Fiber Wheels 19′s and 20′s
American Racing Headers
American racing headers X pipe with cats
B&B Bullet Exhaust
Carbon Fiber MPH intake Manifold
Ported Throttle Body
Drilled and Slotted Brake Rotors
MCM Carbon Fiber Hood with Cleared Center Section
WCMC Carbon Fiber Brake Ducts
Brey Kraus Harness Bar
5 Point belts
VE Custom Carbon Fiber Interior Peices
VE Steering wheel
Redline goods Shift boot, arm rest, and arm rest cover
Tune by Doug at ECS
Loyds Z06 floor mats
Custom Meth tank cover with AIS logo in 1/2 plexi
Textrailia 0Z700 Z grip Clutch
DTE Rear End Brace
Painted lower rear facia

Check out his posters here.

Share on Facebook

We will install one of our latest supercharger systems and one of our small blower cams with all the necessary hardware for $7500. This will include the complete supercharger system with camshaft, springs and a heavy duty adjustable timing set, installation, dyno tuning, fluids etc.

The blower cam will REALLY wake the car up.

If you just want the system installed, without the cam, it will be $6599. We’re just going to do a few at this price. If you think about it, the cam deal is a better way to go. Why? You’re getting the cam installed for just about $0.00!

This deal applies to our Si-Trim (V-2 or V-3) system on any C5 or C6. The C6 Z06 and Z51 LS3 6 speeds will also include a new DeWitt’s radiator. ($650)

If you are interested in a bigger build, give us a call, we’ll work an equally great deal on a complete forged motor and supercharger setup.

A&A Corvette C5 Supercharger Kit

A&A Corvette C6 Supercharger Kit

Share on Facebook

Vengeance Racing in Georgia installed an A&A Corvette Supercharger Kit on Norm’s 2002 Z06 Corvette. On the rollers after the modifications, it put down 599RWHP!

Modifications completed while at Vengeance Racing include:

A&A Corvette Custom Supercharger System
Vortech V-3 Si Supercharger
Siemens Flow Matched / Balanced Fuel Injectors
FAST 92mm Intake Ported by Vengeance
GM LS2 90mm Throttlebody
American Racing Longtube Header Systems with Hi Flow Catted X pipe
Complete / Professional Installation by Vengeance Racing
Custom Tuning VIA EFI live
Pfadt Racing Coilovers
Pfadt Racing Sway Bars
599.10 RWHP
525.00 RWTQ

Vengeance Racing
241 Castleberry Industrial Drive, Suite B
Cumming, GA 30040
678-513-7105
http://www.vengeancerd.com

Share on Facebook

Reckart Performance Tuning, in Cedar Park, TX, just installed an A&A Corvette Supercharger Kit on this 1999 Corvette. The car went to Brian with Texas Speed 220/220 0.576”0.576” 114 LSA Camshaft, Stage 1 LS6 heads and 7.400” Chromemoly Pushrods, and Kooks 1.75″ Long tube headers with cats. In this form the car made 381 RWHP and 360 RWTQ. They installed the V-2 Si-Trim supercharger and then did a custom tune. New numbers are 573 RWHP and 515 RWTQ!

718B North Park Circle
Cedar Park, TX 78613
(512)653-8887
http://www.reckartperformancetuning.com

Share on Facebook

A&A Vortech strikes again!

Aleck brought his near stock (just a Vararam & dyno tune) 2004 Z06 to EnglandGreen, in Houston, for their A&A Corvette Vortech Si-Trim supercharger install special. They also installed the A&A MAF girdle.

His baby left with 533rwhp and 476rwtq! A gain of 159 horsepower and 111 ft. lb. of torque!

EnglandGreen Corp.
3135 Fall Street
Houston,TX 77054
281-464-2800
http://www.englandgreen.com

Share on Facebook

What happens when you take a 1997 Corvette with 190,000 miles on it and swap in a GM LS3 Crate Engine and add an A&A Corvette Supercharger? 700 RWHP and 623 RWTQ, that’s what happens. RMCR in Colorado Springs, CO performed the work on this project. The customer is doing the car from the inside out. The outside of the car has seen better days, but stay tuned for updated photos of the project.

Modifications:

http://www.rmcrperformance.com

Share on Facebook

EnglandGreen Corp. in Houston, TX, recently installed an A&A Corvette Supercharger Kit on Kevin’s bone stock 2002 Z06. No other modifications were done to the Vette. After tuning the newly boosted Z, the horsepower gain over stock was 192! Torque increase of 141 ft/lbs. Final results: 553rwhp 495rwtq.

EnglandGreen Corp.
3135 Fall Street
Houston,TX 77054
281-464-2800
http://www.englandgreen.com

Share on Facebook

Here are some photos of Freddy’s 2002 Z06. We installed an A&A Supercharger kit with the Vortech V-2 Si-Trim Supercharger. Also installed was an A&A Blower camshaft kit.

Share on Facebook

East Texas Muscle Cars in Longview, Texas just finished up another installation of an A&A Corvette Supercharger Kit. This time, it was on a 2002 Corvette Z06. The car came into the shop with an axle back exhaust and a cold air intake. The before dyno pull put the Vette at 364RWHP. After the install of the supercharger kit, headers, blower cam kit, and a dyno tune, it put down 656 RWHP!

Follow along with the install in the pictures below.

East Texas Muscle Cars
5917 McCann Rd
Longview, TX 75605
903-686-0456
www.easttexasmusclecars.com

Share on Facebook