Vengeance Racing in Cumming GA is known for turning out some impressive builds.  Here’s another to add to their growing list.  This C5 Z06 underwent quite a few upgrades during its stay with Vengeance.  The Vengeance team had previously installed a A&A Supercharger Kit, along with some other bolt-ons.  The owner quickly became addicted to boost, and wanted more…lots more!

 

The goal for this build was to make as much HP as possible, while maintaining streetability.  The stock LS6 block was removed and replaced by a freshly built RHS 427 block.  A Vengeance spec blower camshaft, Trickflow 245cc 6 bolt heads, and ARP studs were also added.  The Vortech V3 Si-Trim was swapped out for the V7 YSi, and the factory 6 rib belt drive was upgraded to a A&A 8 rib drive.  The car went on the dyno and spun the rollers with a vengeance!  The final number, 879 RWHP & 749 RWTQ w/15 PSi on 93 octane!!

This one clean Z06!  The rumble from the exhaust at idle, and that sweet Vortech V7 blower whine let unsuspecting car enthusiasts know that this monster is far from stock.

C5 Z06 Mod list:
Modifications previously installed by Vengeance Racing
FAST 90mm Intake- Ported/Painted
A&A V3 SI Supercharger system
American Racing 1 7/8 Longtube Headers with Catted X pipe

Current Modifications
Engine
RHS Block- 4.125 Bore/Standard Deck
Callies 4″ Crankshaft
Callies HD 6.125 Connecting Rods
Diamond Custom Pistons
Total Seal Rings
Calico Coated Main/Rod Bearings
Katech C5R Timing Chain with Cloyes Billet Gears
Melling Hi Volume Oil Pump
Morel Linkbar Hydraulic Lifters
Vengeance Racing Spec Blower Camshaft
Trickflow 245cc CNC 6 Bolt Cylinder heads
Cometic MLS Head Gaskets
ARP Studs Top to Bottom
Hardened Pushrods

Power Adder
A&A Supercharger System
YSI Upgrade
8 Rib Upgrade
03/04 Alternator Bracket

Drivetrain
RPS Triple Carbon Clutch Kit
Tick Adjustable Master Cylinder
GM Slave Cylinder
RPM Transmissions Level V T56
MGW Short Throw Shifter
RPM Poly Torque Tube Couple Rebuild Kit

Suspension
Pfadt Race Engineering Coilovers
Pfadt Race Engineering Engine Mounts
Pfadt Race Engineering Transmission Brace/Mount

Fuel System
RSI Billet Hat with Twin Walbro 340s
Custom Feed/Return Lines
Aeromotive Regulator
FAST Billet Rails
FIC 80lb/Hr Flow Matched Fuel Injectors

Misc
ACP Louvered Extractor Hood
Vengeance Racing Coil Relocation Kit
Vengeance Racing Billet Valve Covers

Idle clip:

Vengeance Racing
241 Castleberry Industrial Drive, Suite B
Cumming, GA 30040
678-513-7105
http://www.vengeancerd.com