- England Green 2007 Z06 Corvette Supercharger Kit Install – 644RWHP September 2, 2010
- Vengeance Racing 2008 Z06 Corvette A&A Supercharger Kit Install – 789 RWHP August 31, 2010
- East Texas Muscle Cars A&A Supercharger Install 2001 Z06 – 595RWHP! August 19, 2010
- Andy Wheeler’s 2001 Z06 – A Photographer’s Car at 550 RWHP August 18, 2010
- Luigi’s A&A Supercharged 2009 Corvette – 597 RWHP! August 12, 2010
- Champion Motors 2007 Corvette A&A Supercharger Kit Install – 569 RWHP August 4, 2010
- AutoXTC 2005 Corvette A&A Supercharger Kit Install – 620 RWHP August 3, 2010
- No Slip **ACT Clutch Installation Special** July 28, 2010
- It’s Hotter Than July A&A Corvette Supercharger Installation Sale July 28, 2010
- Vengeance Racing 2002 Z06 Corvette A&A Supercharger Kit Install – 599 RWHP July 16, 2010
Archives
- September 2010
- August 2010
- July 2010
- June 2010
- May 2010
- April 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
- October 2009
- September 2009
- August 2009
- July 2009
- June 2009
- May 2009
- March 2009
- February 2009
- January 2009
- December 2008
- September 2008
Meta
Categories
Blogroll
Author: VettePro
~ January 29, 2010
EnglandGreen Corp. in Houston, TX, just installed an A&A Corvette Supercharger kit on Jason’s 2006 Corvette. The car is a manual transmission and has no other performance modifications. The A&A Corvette C6 Supercharger Kit utilized here comes with a Vortech V-2 Si-Trim Supercharger and the A&A Corvette “Ram Air” Intercooler. After tuning the car, they saw 513 RWHP and 485 RWTQ! Keep an eye for more installs.
EnglandGreen Corp.
3135 Fall Street
Houston,TX 77054
281-464-2800
http://www.englandgreen.com
Author: VettePro
~ January 26, 2010
Libertyville Chevrolet in Libertyville, IL, installed an A&A Corvette Supercharger kit on this 2008 Corvette Z06 back in the summer of 2009.
This 2008 C6 Z06 includes:
A&A Corvette Supercharger Kit
Melrose Longtube Headers
Pfadt Racing Suspension system
WCC Forged 946 C6 Z06 Wheels
Stainless steel brake lines
Dyno tune came back at 598 RWHP.
Libertyville Chevrolet
1001 S Milwaukee
Libertyville, IL 60048
847-362-1424
http://www.libertyvillechevrolet.com
Author: VettePro
~ January 21, 2010
Libertyville Chevrolet in Libertyville, IL, installed an A&A Corvette Supercharger kit on this 2008 Corvette back in the summer of 2009.
This 2008 C6 convertible automatic includes:
A&A Corvette Supercharger Kit
Z06 widebody package- front fenders, rear quarter panels, and Z06 front fascia
Z06 Upgraded brake package
CCW Custom Wheels
Melrose Longtube Ceramic Headers
Billy Boat Fusion exhuast with Wild to Mild switch
Dyno tune came back at avg. 550 rwhp, best run of the day 565.
Libertyville Chevrolet
1001 S Milwaukee
Libertyville, IL 60048
847-362-1424
http://www.libertyvillechevrolet.com
Author: VettePro
~ January 18, 2010
A&A Corvette Custom Supercharger Kit
Vortech V-2 S-Trim Supercharger
MSD 8.5 Wires
Autometer Fuel Pressure Gauge
Autometer Boost Gauge
Autometer Gaugeworks Gauge Pod
Corsa Exhaust
517 RWHP
462 RWTQ
Author: VettePro
~ January 15, 2010
Hey gang, check out the March 2010 issue of Vette Magazine! Our friends at Stenod Performance in the Detroit, Michigan area installed one of our A&A Corvette V-2 Si-Trim Sueprcharger Kits.
Here is the link to the vette article:
http://www.vetteweb.com/tech/vemp_1003_blower_systems_on_c5_and_c6_corvettes/index.html
Author: VettePro
~ January 14, 2010
A&A Corvette Supercharger Kit
Vortech V-2 Si-Trim
Dewitt’s High Performance Radiator
Autometer Boost and Fuel Pressure Gauges
Autometer Dual Pod
678 RWHP
600 RWTQ
Author: VettePro
~ January 12, 2010
Ron and the guys at Vengeance Racing in Georgia finished up this 2007 LS2 Corvette a couple weeks ago. On the rollers after the modifications, it put down 579 RWHP! Great results!
Modifications include:
A&A V-3 Si-Trim Supercharger System with 3.8″ Pulley
Dewitt Hi Capacity Radiator
Flow Matched 60lb/hr Fuel Injectors
KB Boost Pump
RPS Street Twin Lite Clutch Kit
Longtube Headers with Catted X pipe
Complete Professional Installation by Vengeance Racing
Custom programming VIA EFI live by Vengeance Racing
Short WOT Video with TCS on per customer request
Vengeance Racing
241 Castleberry Industrial Drive, Suite B
Cumming, GA 30040
678-513-7105
http://www.vengeancerd.com
Author: VettePro
~ January 7, 2010
JUAN and the crew of NEOH2NED Corvette in Puerto Rico installed and tuned an A&A Corvette Supercharger Kit on this 2008 A6 C6 Corvette LT3 Package. Along with the Supercharger, they added a LG Motorsport Long tube headers, Borla catback, and a special A6 transmition tune. The end result was 541 RWHP Here are the specs:
A&A Corvette Supercharger kit
Vortech V-3 Si-Trim Supercharger
LG Pro Longtube Headers 3” headers with X pipe
Borla Sport cat-back Exhaust System
Elite Engineering PCV Oil Catch Can and Thermal-Abs Tunnel Reinforcement Plate
Digital Boost and Fuel Pressure with memory & Wide Band Air / Fuel Gauge Package
Z06 Front and Rear body kit Conversion
Z06 6 PISTON FRONT, 4 PISTON REAR CROSS DRILLED BRAKES
Nitto INVO tires 345-30-19 Rear and 285-35-18 front
Black 10 spoke SPIDER DESIGN ALUMINUM WHEELS10-Spoke Spider Competition Gray Wheels 10-Spoke Spider Competition Gray Wheels
Performance Axle, 2.73 ratio, limited slip
Full Length Rear Racing Spoiler
541 RWHP
495 RWTQ
Author: VettePro
~ January 6, 2010
Forged 5.7 LS1
347 CID
10.0:1
TFS Heads 215′s
224/228 581″ 588″ lift 114 LSA Cam
Harland Sharp 1.7 RR’s
Manley Forged/ A&C Rings
SCAT Forged
LS6 Manifold
Stock Ported and Polished TB by LAPD
80lb Siemen Deka Injectors
LPE Fuel Pump W/ MAGNAVOLT BAP
Stock Coil Packs/ MSD Wires/ NGK TR55’s
MEZIERE Electric Water Pump/180* Stat
Stock PCM W/2-BAR MAP Sensor/Hp Tuners by Charlie @ RPM Motors
P1SC-1 – W/3.2″ Pulley and A&A 2nd Gen Procharger Bracket
14.4 PSI of Boost
ProCharger Twin Intercoolers W/ AlkyControl Methanol Kit
KOOKS Headers 1 3/4″/Hi-Flow Cats/X-Pipe/Titanium Z06 Exhaust
YANK 3200 Stall
3.42 Rear Gear
Wildwood Drilled and Slotted Brakes
C6 Z51 Sway Bars/ C5 Z51 Shocks/ Stock Springs
C6 Z06 Replicas 18×9.5 Front / 19×11 Rears
245/40/18 285/35/19 GoodYear F1 Run Flats
Author: VettePro
~ January 5, 2010
How do I hook up my fuel pressure gauge when I get an A&A Corvette fuel system?
When you install a fuel pressure gauge on your 1997- present C5 or C6 Corvette, you tap into the shrader valve on the driver side fuel rail. When you install the A&A Corvette Fuel System, you also need to tap into the same valve.
Hmmm… Dilema? Nope! Our Fuel System comes with a fuel pressure regulator that has an extra 1/8″ NPT port. Go out and get yourself a 1/8″th NPT to 1/8″ NPT F 45 degree fitting (Can’t find it? Call us!). Attach the fitting and then the fuel pressure sending unit from the gauge to that. Done!
