England Green in Houston just installed an A&A Corvette Supercharger Kit on John’s2007 C6 Z06. There were no other modifications made to the car. Yes, this car is bone stock otherwise. The end result? 644 RWHP and 560 RWTQ.

EnglandGreen Corp.
3135 Fall Street
Houston,TX 77054
281-464-2800
http://www.englandgreen.com

Share on Facebook

East Texas supercharged Marcus’ 2001 Z06 Corvette. He bolted a “NEWSED” (New and used parts) A&A Corvette supercharger kit which utilizes a Vortech V-3 Si-Trim. This kit also utilized an earlier style air to air intercooler. (Newer systems use the “Ram Air” style) Also installed was a set of long tube headers and a Corsa cat-back system. After cusom tuning was finished, the Z06 put down 595rwhp and 509rwtq. Follow along with the install in the following pictures and video.

East Texas Muscle Cars
5917 McCann Rd
Longview, TX 75605
903-686-0456
www.easttexasmusclecars.com

Share on Facebook

 Champion Motors, in Ontario, Canada, supercharged Mike’s 2007 Corvette. The addition of the A&A Corvette Supercharger kit increased the horsepower 339 to 569 and the torque increased from 346 lb./ft. to 495 lb./ft. This is a gain of 230 RWHP!

Champion Motors
1861 O’Connor Drive
North York, Ontario M4A 1X1
416-751-8047
http://www.cdnperf.com

Share on Facebook

Here  is a 2005 C6 Z51 Convertible Black on Black Corvette that AutoXTC in Clearwater, FL, installed an A&A Corvette Supercharger Kit on. The car has many modifications besides the supercharger, including headers, camshaft, valve springs, heavy duty clutch, custom wheels and more. The Vette puts down 620 RWHP and 620 lb./ft. RWTQ! Here is the list of modifications:

A&A Corvette Supercharger Kit
Vortech V-2 S-Trim Supercharger
Melrose Headers
Magnaflow Exhaust
Custom Grind Camshaft (580 intake, 225 duration, 590 exhaust,229 duration, 114 lobe separation)
.650 Lift Dual Springs w/Titanium Retainers
New Valve Seals and Keepers
7.400 Hardened Push rods
New Cryogenic Timing Chain
Reworked Oil Pump For Higher Pressure
New Timing Cover Gasket and Seal
New Harmonic Balancer Bolt
160 Deg Low Thermostat
PCM Performance Tune w/Read Out
New head gaskets
Ported Intake and TB
775hp Monster Clutch Lvl 3.5
Vossen VVS087 Wheels
Pirelli Tires
Black Tail Wing
Hurst Skull Shifter
Black-Out Lights (not fully in tail)
Red Calipers
Black Engine Covers
Powder-coated Black Rear Plate
Chrome Trim – gearshift boot and cup holder
Interior Black Trim / Dash&Doors
Navigation/Touch screen – std. Bose speaker system
iPod connector in cup holder – modified by AutoXTC
Escort 9500ix Radar Detector GPS inviscord/rear-view
620 RWHP
610 RWTQ

AutoXTC
4400 118th Ave. N. #305
Clearwater, FL 33762
727.556.0335
http://www.autoxtc.com

Share on Facebook

Vengeance Racing in Georgia installed an A&A Corvette Supercharger Kit on Norm’s 2002 Z06 Corvette. On the rollers after the modifications, it put down 599RWHP!

Modifications completed while at Vengeance Racing include:

A&A Corvette Custom Supercharger System
Vortech V-3 Si Supercharger
Siemens Flow Matched / Balanced Fuel Injectors
FAST 92mm Intake Ported by Vengeance
GM LS2 90mm Throttlebody
American Racing Longtube Header Systems with Hi Flow Catted X pipe
Complete / Professional Installation by Vengeance Racing
Custom Tuning VIA EFI live
Pfadt Racing Coilovers
Pfadt Racing Sway Bars
599.10 RWHP
525.00 RWTQ

Vengeance Racing
241 Castleberry Industrial Drive, Suite B
Cumming, GA 30040
678-513-7105
http://www.vengeancerd.com

Share on Facebook

Reckart Performance Tuning, in Cedar Park, TX, just installed an A&A Corvette Supercharger Kit on this 1999 Corvette. The car went to Brian with Texas Speed 220/220 0.576”0.576” 114 LSA Camshaft, Stage 1 LS6 heads and 7.400” Chromemoly Pushrods, and Kooks 1.75″ Long tube headers with cats. In this form the car made 381 RWHP and 360 RWTQ. They installed the V-2 Si-Trim supercharger and then did a custom tune. New numbers are 573 RWHP and 515 RWTQ!

718B North Park Circle
Cedar Park, TX 78613
(512)653-8887
http://www.reckartperformancetuning.com

Share on Facebook

A&A Vortech strikes again!

Aleck brought his near stock (just a Vararam & dyno tune) 2004 Z06 to EnglandGreen, in Houston, for their A&A Corvette Vortech Si-Trim supercharger install special. They also installed the A&A MAF girdle.

His baby left with 533rwhp and 476rwtq! A gain of 159 horsepower and 111 ft. lb. of torque!

EnglandGreen Corp.
3135 Fall Street
Houston,TX 77054
281-464-2800
http://www.englandgreen.com

Share on Facebook

Check out the work that EnglandGreen did to this 2007 Corvette. They installed their Whiplash cam kit, A&A Corvette Supercharger Kit with a Vortech Si-Trim supercharger, F.A.S.T. 102mm intake (ported by SpinMonster), AFR 235cc heads, Methanol Injection system and American Racing headers. The car was completely stock when it made it’s way from Florida to the crew at EnglandGreen. In the stock trim, the LS2 made 372rwhp and 375rwtq. After Jason, Stephen and crew were finished, it made665rwhp and 568rwtq. A gain of 293 horsepower and 193 lb/ft of torque with less than 7 pounds of boost!!!

Approximately 785 horsepower at the crank! And it drives like stock!

EnglandGreen Corp.
3135 Fall Street
Houston,TX 77054
281-464-2800
http://www.englandgreen.com

Share on Facebook

What happens when you take a 1997 Corvette with 190,000 miles on it and swap in a GM LS3 Crate Engine and add an A&A Corvette Supercharger? 700 RWHP and 623 RWTQ, that’s what happens. RMCR in Colorado Springs, CO performed the work on this project. The customer is doing the car from the inside out. The outside of the car has seen better days, but stay tuned for updated photos of the project.

Modifications:

http://www.rmcrperformance.com

Share on Facebook

The Vette Doctors in Amityville, NY, just finished up Vito’s 2008 Z06. They installed an A&A Corvette Supercharger kit along with American Racing long tube headers and an Alky injection kit. After the Docs installed the supercharger kit and tuned the car, it made 677 RWHP and 575 RWTQ!

The Vette Doctors, Inc.
26 Elm Place
Amityville, NY 11701
631-841-0779
http://www.thevettedoctors.com

Share on Facebook