Vengeance Racing in Cumming, GA, just finished this 2008 Z06 forged engine and supercharger package installation. From the Proline Race Engines forged 427″ LS7 shortblock to the A&A Corvette YSi supercharger kit, this Vette put down 789 RWHP!

Mods:
Proline Race Engines -- Forged 427″ LS7 Shortblock
ARP Main & Head Studs
Comp 26926 Spring Kit
Katech C5R Timing Chain
American Racing 1-7/8″ Stainless Longtubes
A&A Corvette Supercharger System
Vortech YSi-Trim Supercharger
A&A 8-rib Upgrade
12 Pounds of Boost
RPS Street Twin Lite Clutch Kit
Pfadt Racing Coilovers
Pfadt Racing Sway Bars
Pfadt Racing Adjustable Camber Kit
Install / Tuning by Vengeance Racing
789.74 RWHP
712.65 RWTQ

Street Video:

Vengeance Racing
241 Castleberry Industrial Drive, Suite B
Cumming, GA 30040
678-513-7105
http://www.vengeancerd.com

Share on Facebook

Even though Andy Wheeler sold this beauty a couple years ago, it is still one of the best looking Vettes we’ve seen. Enjoy the photos!

Modifications:
A&A Corvette Custom Supercharger Kit
Vortech S trim Supercharger
3.6″ 6-Rib Custom Painted Riechard Racing Pulley
AIS Trunk Mounted Alcohol Injection
Turbo Smart Blow off Valve
Modular Concept Carbon Fiber Wheels 19′s and 20′s
American Racing Headers
American racing headers X pipe with cats
B&B Bullet Exhaust
Carbon Fiber MPH intake Manifold
Ported Throttle Body
Drilled and Slotted Brake Rotors
MCM Carbon Fiber Hood with Cleared Center Section
WCMC Carbon Fiber Brake Ducts
Brey Kraus Harness Bar
5 Point belts
VE Custom Carbon Fiber Interior Peices
VE Steering wheel
Redline goods Shift boot, arm rest, and arm rest cover
Tune by Doug at ECS
Loyds Z06 floor mats
Custom Meth tank cover with AIS logo in 1/2 plexi
Textrailia 0Z700 Z grip Clutch
DTE Rear End Brace
Painted lower rear facia

Check out his posters here.

Share on Facebook

Luigi brought his 2009 Z51 Corvette to Tom at Wong’s Performance in Vancouver, WA, to have an A&A Supercharger kit installed. In addition to the custom supercharger kit, he also had American Racing long tube headers installed. The car was tuned and the power was impressive!  The results on the rollers? 597 RWHP and 544 RWTQ.

A&A Corvette Custom Supercharger Kit
Vortech V-3 Si-Trim Supercharger
American Racing Headers
Custom tune by Tom Wong
597 RWHP
545 RWTQ

Wong’s Performance Engineering
9305 NE Hwy 99
Vancouver, WA 98665
360-695-9433

Share on Facebook

In December, 2008, Andy flew to Phoenix to pick up John’s brand new Z06. He drove it back to Southern California and we immediately went to work pulling the motor to install forged pistons, a blower cam, an RPS clutch and other goodies. The car left with 778 rwhp and 681 rwtq. Fast forward to beginning of May and John decides he wants a more aggressive cam, Pfadt coil overs, DeWitts dual fan kit, larger dongle and some other minor work. Here are some pictures of John’s Z getting the second round of go fast treatment.

Here’s a short list of the updated modifications:
LS7 shortblock honed .005″ over
Diamond Forged Dished Pistons
Stainless exhaust valves
Dual valve spring kit
A&A Corvette Supercharger Cam 23x/24x
Dewitts Radiator
Dewitts Spal Dual Fan Kit
RPS Carbon – Carbon lite twin disc clutch
A&A Corvette Custom Supercharger Kit
Vortech V-7 YSi-Trim Supercharger
A&A Corvette 8-rib Conversion
A&A Corvette Fuel System with Aeromtive A1000
Aeromotive Fuel Rails
80lb Fuel Injectors
MSD Coils
Brembo Gran Turismo Brakes
RPM 3.90 Rear End
Pfadt Adjustable Coil Over Kit
Pfadt Street Sway Bars
Dynatec 1 7/8″ Headers
B&B Fusion Exhaust
LG Man Knob
Autometer Boost and Fuel Pressure Gauges
Autometer Gaugeworks Gauge Pod
818 RWHP
715 RWTQ

Share on Facebook

A&A Corvette Supercharger Kit
Vortech V-2 Si-Trim
Dewitts A05AE Radiator
A&A Corvette 228-236 Cam
Dual Valve Springs
HD Timing Set
ACT Dual Disc Clutch
Pfadt Yellow Coolant Hoses
ARH 1 7/8 Headers
LG Motorsports Man Knob
Z06 Muffler Mod
Yellow Painted Valve Covers
Yellow Painted Top Shroud
Yellow Painted Intake Manifold
Red Painted Coil Brackets
626 RWHP
591 RWTQ

Share on Facebook

Here are some photos of Freddy’s 2002 Z06. We installed an A&A Supercharger kit with the Vortech V-2 Si-Trim Supercharger. Also installed was an A&A Blower camshaft kit.

Share on Facebook

A&A Corvette Supercharger Kit
A&A Corvette Blower Cam
Heavy Duty Valve Springs with Titanium Retainers
Dewitts Radiator
642 RWHP
581 RWTQ

Share on Facebook

A&A Corvette Performance Supercharger Kit
Vortech V-2 T-Trim Supercharger
A&A Corvette 8-Rib Pulley Upgrade
A&A Corvette External Fuel System
A&A Corvette Forged 418 LS3
CNC Ported LQ9 Heads
A&A Corvette Blower Cam
80 lb/hr injectors
ACT Dual Disc Clutch
American Racing 1 7/8″ Headers
Modified C6 Z06 Mufflers
LG Motorsports Shift Knob With Exhaust Switch
Wilwood 14″ Drilled 6-Piston Front Brakes
Wilwood 14″ Drilled 4-Piston Rear Brakes
712 RWHP
691 RWTQ

Share on Facebook

A&A Corvette Custom Supercharger Kit
Vortech V-2 S-Trim Supercharger
MSD 8.5 Wires
Autometer Fuel Pressure Gauge
Autometer Boost Gauge
Autometer Gaugeworks Gauge Pod
Corsa Exhaust
517 RWHP
462 RWTQ

Share on Facebook

A&A Corvette Supercharger Kit
Vortech V-2 Si-Trim
Dewitt’s High Performance Radiator
Autometer Boost and Fuel Pressure Gauges
Autometer Dual Pod
678 RWHP
600 RWTQ

Share on Facebook